Official Kranzle Car Detailing Kit
Includes Foam Cannon, Gun Jet, Stainless Quick Disconnects, spray tips
5 March, 2021 by
Official Kranzle Car Detailing Kit
Dirt Killer Kranzle USA Atlantic Pressure Washers, Michael Zittel DK


Detail Kit Video Transcript

Speaker 1 (00:04):

Hi, I'm Mike Z with Kranzle USA : Pressure Washer Perfection. Today, I'm going to show you how to assemble the official Kranzle detailer kit. This detailer kit is good for the 1622 and the 1122.  When you're ordering, just be sure you choose the right one because the orifice size, the nozzles does make a difference. Now what comes in the kit? The kit comes with the official Kranzle foam cannon with a one quarter inch plug already installed. It also comes with all the stainless steel disconnects that you need. It also comes with the starlet Gun jet , which when you pick that up, you're going to feel that it's a really well-made tool. It also comes with a five-piece nozzle kit, so let's get it assembled, make sure you know how to do it so that you can get to detailing your car. First. Let's take a look at the starlet trigger assembly.

Speaker 1 (01:05):

First let's put on female connector. It goes right here. This is quarter inch. Now notice this does have plumbers tape. So at this connection, you need plumbers tape as well as here then on the swivel. You'll also need plumbers tape but you only need it on here. So I just put that in hand tight. You of course will want to tighten down with a wrench on that. Next we have the hose swivel, same thing. We've already got the tape on there. Tighten that down with a wrench. Then we have a three eights plug that goes right here and you'll see how that all fits together a minute. So here, you know, you're gonna need two wrenches to get that properly tightened. So that is the gun jet itself. Let's just set that aside for a moment. You'll notice in your kit, you have two additional pieces. This is a 22 millimeter male threaded socket and a 22 millimeter plug. They go together. And this is how. Use the socket on the hose. Let's just bring this over here so you can take a closer look. The hose. Focus. If you look inside, you can see

Speaker 2 (02:49):

There was an O-ring in there,

Not just there, but down at the very base. That's why with the Kranzle connections, you don't need plumbers tape. You just need to thread it in hand tight, like so, okay. Only hand tight. You don't want to crank down on this. You can crack.. Otherwise you can crack the shaft. You just want to be hand tight. Okay. And that's what it looks like. So you can put that aside. And then the 22 millimeter plug is right here on the default gun that came with your machines. So the reason we include this is because now you have a quick disconnect on your hose. And if you want to switch from the other assembly to this one, you can do so easily. It also minimizes wear and tear on the O-ring that's inside. So that's why those are included. So now all your pieces are put together and accounted for, and now we can connect easily foam cannon. All right, there we go. You can go wash your car now much easier than instead of that long lance. If you have any questions? Feel free to leave a comment, give us a call. Visit our website. My name's Mike Z with Kranzle USA pressure washer perfection.

Official Kranzle Car Detailing Kit
Dirt Killer Kranzle USA Atlantic Pressure Washers, Michael Zittel DK 5 March, 2021
Share this post